Rockwell Automation 20Y PowerFlex 700H, 700S, and 700AFE Drive Fan Systems, Frames 9...14 - Manual (Page 96)

96 Rockwell Automation Publication PFLEX-IN029B-EN-P - August 2014
Chapter 3 PowerFlex 700H and 700S Drives - Frame 11 Procedures
4. Using a 17mm wrench, loosen the three connections to the output
terminal next to the inverter assembly.
5. If applicable, cut the cable-tie that secures the cable to the capacitor and
disconnect the cable.
6. Disconnect the four wires from the top and bottom of the fuse block
(located on the center drive inverter assembly).
4
17 mm
40 N
• m (354 lb • in)
5
Note: AC Fan System Shown
6