Rockwell Automation 20Y PowerFlex 700H, 700S, and 700AFE Drive Fan Systems, Frames 9...14 - Manual (Page 84)

84 Rockwell Automation Publication PFLEX-IN029B-EN-P - August 2014
Chapter 2 PowerFlex 700H and 700S Drives - Frame 10 Procedures
5. Disconnect the cable from connector X1 on the ASIC board and remove
the fan assembly from the drive.
6. For newer drives only, remove the M4 x 15 mm hexalobular screw that
secures the fan to the bracket.
7. Install the ASIC cooling fan and assembly in the reverse order of removal.
5
6
T20
3.0 N
• m (27 lb • in)