Rockwell Automation 20Y PowerFlex 700H, 700S, and 700AFE Drive Fan Systems, Frames 9...14 - Manual (Page 224)

224 Rockwell Automation Publication PFLEX-IN029B-EN-P - August 2014
Chapter 7 PowerFlex 700AFE Drive - Frame 10 Procedures
10. Install the new LCL filter fan power supply using the one M4 x 12 mm and
two M5 x 10 mm screws provided.
11. Connect the X51 and X53 connectors to the fan power supply circuit
board.
12. Insert the X1 fan cable connector into the receptacle on the fan sheet
metal housing.
X51
X53
Image for SK-Y1-DCPS2-F10
12 Image for SK-Y1-DCPS2-F10