Rockwell Automation 20Y PowerFlex 700H, 700S, and 700AFE Drive Fan Systems, Frames 9...14 - Manual (Page 38)

38 Rockwell Automation Publication PFLEX-IN029B-EN-P - August 2014
Chapter 1 PowerFlex 700H and 700S Drives - Frame 9 Procedures
11. Remove the two M4 x 8 mm fan inverter mounting screws and, while
turning the fan inverter slightly sideways, remove the DC fan power supply
assembly.
12. Install the main DC fan power supply system in the reverse order of
removal.
IMPORTANT If you are servicing a 400V/480V Frame 9 drive, insert the jumper on connector
X3.
PZ2
2.3 N
• m (20.4 lb • in)