Rockwell Automation 20Y PowerFlex 700H, 700S, and 700AFE Drive Fan Systems, Frames 9...14 - Manual (Page 27)

Rockwell Automation Publication PFLEX-IN029B-EN-P - August 2014 27
PowerFlex 700H and 700S Drives - Frame 9 Procedures Chapter 1
5. Remove the fuses from the fuse holder.
6. Disconnect the four fuse power wires (black and red pairs) from the top
and bottom of the fuse holder.
7. Disconnect the stirring fan power wires.
IMPORTANT Mark all connections and wires before removing to avoid incorrect wiring
during reassembly.
IMPORTANT Note that the red wires connect to the left side terminal on the fuse
holder and the black wires connect to the right side terminal on the
fuse holder.
6
6
5
7
Red Black
Red Black