Rockwell Automation 20Y PowerFlex 700H, 700S, and 700AFE Drive Fan Systems, Frames 9...14 - Manual (Page 222)

222 Rockwell Automation Publication PFLEX-IN029B-EN-P - August 2014
Chapter 7 PowerFlex 700AFE Drive - Frame 10 Procedures
5. Remove the three M5 x 10 mm hexalobular screws that secure the
assembly to the fan housing. Then shift the assembly sufficient to remove
the X51 and X53 connectors.
6. Disconnect the X1 fan cable from the connector on the fan sheet metal
housing.
X51
X53
Image for SK-Y1-DCPS2-F10
5
6 Image for SK-Y1-DCPS2-F10