AJA Ki Pro Mini - Manual (Page 16)

KiPro Mini v4.2 www.aja.com 16
Figure 3. Ki Pro Mini Connectors
Connections
• HDMI—v1.3 video with embedded audio (2 channels input, 8 channels output ), 1x
connector for input and 1x connector for output.
• HD/SD-SDI Input and Output, with 8 channel embedded audio (2x BNC)
• 2 channel balanced analog audio Inputs (2x XLR)
• Line/Mic Level Switch (analog XLR audio input level)
• LANC loop (for external control)
• LTC Input (BNC)
• 10/100/1000 Ethernet LAN
LTC Timecode Input One BNC provides connection to the house LTC timecode generator or source. This
connection is high impedance.
SDI Input and Outputs Two BNC connectors are provided for SDI input and output. SDI input and output
supports SD-SDI and HD-SDI video and embedded 24-bit digital audio. If your camera
has multiple outputs, look to see if it has SDI, and use it where possible for the highest
quality.
HDMI Two HDMI connectors provide for input and output of HDMI compatible video (version
1.3) and multi-channel embedded audio. HDCP is not supported on either input or
output; only original material, such as that generated by a camcorder, is an acceptable
HDMI source. The HDMI input is designed to support long cable runs: up to 100 feet
(30.48m) when using 22 or 24AWG HDMI cable, or up to 50 feet (15.24m) using 28 or
30AWG HDMI cable. The HDMI output supports standard HDMI cables only.
ON/OFF
shows which
ot is active
LTC
Input
Ethernet
10/100/1000
RJ45
(for Browser Control)
HD/SD SDI I/O
(2x BNC)
HDMI v1.3a I/O
(2x HDMI)
2 channel
balanced
analog
audio input
port,
Selection
edia
on Buttons
LANC
Loop
Connector
Side
line, mic, or
phantom level
switch