AJA Ki Pro Mini - Manual (Page 40)

KiPro Mini v4.2 www.aja.com 40
Playing Back a Clip
To playback recorded media, select a clip and press PLAY. If the clip you wish to playback
is not currently selected, use the SELECT up/down buttons until the clip name appears
on the display. Like recording, there is more than one way to initiate playback (front
panel or web browser). From the front panel these are the basic steps:
1. Press the STOP button to get to the TRANSPORT mode (if not already there). Find the
clip name in the display (it shows the current clip/reel).
2. Press the SELECT up or down arrow button repeatedly until you find the clip you are
looking for.
3. Press the PLAY (>) button.
4. When playing back a clip (PLAY, FF, or REV) the first push of STOP acts as a “Pause”
mode: the playback is paused, the current point of the clip is displayed, and the STOP
button will flash. A second push of STOP will completely stop the playback and Ki Pro
Mini's outputs will go into an “E to E” mode (the currently selected inputs will be
bypassed to the outputs). When a playback reaches the end of a clip, it will
automatically pause on the last frame of the clip.
During playback you can use the FFWD, REV, SELECT, or ADJUST buttons as follows:
FFWD >>: Press button to begin fast playback of the current clip at 2x speed.
Successive pushes increase the speed to 4x, 8x, and 16x. (Pushing the button after
16x speed is reached has no further effect.) When fast-forwarding, audio is muted.
REV <<: Pressing REV when not lit, begins playback of the current clip in reverse at 1x
speed. Successive pushes increase the speed to 2x, 4x, 8x, and 16x. (Pushing the
button after 16x speed is reached has no further effect.) When playing in reverse,
audio is muted for all speeds.
SELECT (up/down): while in TRANSPORT mode, the SELECT buttons select clips and
operate like “previous” and “next” keys. When a clip is selected it is “cued” to the
beginning of the clip. Note that ordering and playback of clips is based on timestamp
order, not clip name. If you have paused playback (the STOP button is flashing), you
can use the SELECT down button to jump back to the beginning of the clip. If the
STOP button is not flashing, depressing the SELECT down button will select the
previous clip.
ADJUST (up/down): while in TRANSPORT mode, and in either a “STOP” or “pause”
state, the ADJUST buttons will “single step” the current clip at a rate of one frame per
button push (up=forward, down=reverse).
Deleting Clips
To delete a previously recorded clip:
1. In TRANSPORT mode, use the SELECT up and down arrow buttons to browse through
the clips on the current CF card. When a clip is on another CF card you will press SLOT
repeatedly until it’s selected.
2. When you find a clip you want to delete, press the DELETE CLIP button.
3. Ki Pro Mini asks, “Are you sure.” Press the ADJUST up arrow button to confirm
deletion. Pressing the down arrow, or any other button, will abort the deletion.