AJA Ki Pro Mini - Manual (Page 41)

KiPro Mini v4.2 www.aja.com 41
STATUS menus
The STATUS menus display I/O status and Alarm information. The STATUS menu can be
accessed almost anytime and will not change any active transport modes. Like the
CONFIG and MEDIA menus, STATUS display screens can be viewed by pushing the
SELECT up or down buttons. Pressing STATUS will exit the screens and return to
TRANSPORT mode, where an action could still be occurring (like playback or even
recording).
Record Mode As mentioned earlier in this chapter:
Line 1: Displays the current clip.
Line 2: Displays the current reel number and the current slot selected.
Line 3: Displays the timecode for the clip being recorded or played as well as the
percentage of the media capacity remaining.
Alarm Status The Alarm menu displays warnings and alarms. Some alarms will automatically be shown
on the display. Others will only be seen by checking the STATUS displays (press Select up/
down to cycle through them). If everything is OK, then a “SYSTEM NORMAL” message will
be seen when you cycle through the STATUS displays.
Examples of ALARM displays are shown below. WARNING appears on the first line and
the prompted action item on the second line.
You will be alerted to an alarm condition by having all backlit keys and the display flash
to full intensity for 2 seconds. If more than one alarm state is active, then the display will
hold each alarm notification for 3 seconds before cycling to the next alarm. These alarm
notifications override whatever the display is currently showing for the TRANSPORT or
STATUS menus.
WARNING
NO MEDIA
WARNING
MEDIA REMOVED
WARNING
MEDIA LOW
WARNING
DROPPED FRAMES
WARNING
A/V MISMATCH
WARNING
NO VIDEO INPUT
WARNING
INVALID
SELECTION