Config screen – AJA Ki Pro Mini User Manual
Page 66
KiPro Mini v4.2
www.aja.com
66
Config Screen
The Config screen is a general purpose screen used to configure Ki Pro Mini’s I/O, and
also set up Ki Pro Mini’s environment (name, clock settings, display etc.)
Figure 17. Ki Pro Mini Web Interface, Config Screen
NOTE:
In the following web screen control definitions, the number in parentheses refers to the
Parameter descriptions in Chapter 4—you can read more there about the choices and their
meanings.
Record Type (1.1):
This parameter defines the frame recording method of media stored. RECORD TYPE can
be configured to record the incoming video signal in a “NORMAL” manner, as a “PsF”
signal if the incoming source is 1080psf 29.97 (for example), or VFR for variable framerate
recording of the SD-SDI/HD-SDI input (such as Varicam).
1080p Playback (1.3):
This parameter defines the format applied when 1080p media is played back from
storage.
Super Out (1.9):
This parameter provides superimposition of timecode and transport state (Record, Pause,
etc.) onto the SDI output.
Video Input (2.1)::
This parameter selects a video input source from the video input connections available.
This is the video that will be recorded and/or passed through.
Audio Input (2.2):
This parameter selects an audio input source from the audio input connections available.
This is the audio that will be recorded and/or passed through.
Audio Channels (2.3):
This parameter selects the use of either two or eight audio channels via SDI embedded
audio. Generally, when working with camera sources, there are only one or two audio
tracks being produced, and therefore 2 channel would be the appropriate selection. In
post production use, there are often more channels of audio required, so 8 channel audio
may be the appropriate choice in such situations. Ki Pro Mini only allows for the selection
of either 2 channels or 8 channels of audio to be written to the QuickTime file that is
recorded. Therefore, if the source has more than 2 channels of audio, but less than 8
channels of audio to be preserved, the CONFIG Menu parameter 2.3 Audio Channels
needs to be set to "8 Channels."