AJA Ki Pro Mini - Manual (Page 65)

KiPro Mini v4.2 www.aja.com 65
If 50.1 is set to DHCP, and the DHCP server on the network fails to grant an IP address,
then Ki Pro Mini will fall back to the static IP address.
If 50.1 is set to Default Addr, the factory default static IP address is: 10.65.74.65.
So, if 50.1 is set to Default Addr, you would type the following in the web browser:
http://10.65.74.65 to see Ki Pro Mini’s web interface Main Status screen.
General Screen
Information
All Ki Pro Mini web screens have certain areas in common. On the left of each screen is a
Menu panel listing all the available Ki Pro Mini screen choices. Click any of these items to
jump to that screen. On the right side of each screen you’ll also find a Connection panel.
This area shows the connection status in addition to the Ki Pro Mini’s serial number and
software version. This latter information is useful if you ever have to call AJA Technical
Support to discuss a problem or get help. Below the Connection panel, the Network
panel shows the Ki Pro systems on the network and allows you to switch control between
systems. See
“Controlling Multiple Ki Pros” on page 79 at the end of this chapter for
additional information on using multiple Ki Pros. In the middle of each screen are menu
choices and information pertaining to the subject matter of that screen.
Ki Pro Mini web screens closely mirror the parameter menus displayed on its front panel.
In each of the screens presented on the following pages, we’ll list the parameter menu
numbers that are related so you can read the full definitions. Additionally, the Status
screen lets you change parameter settings right on the screen if you right-click the
setting.
Figure 16. Ki Pro Mini Web Interface, Status Screen
S/N, software version Menu of Ki Pro Screens:
Click one to Display
that Screen
and connection status
List of Ki Pros on the LAN:
Selections and Information
Alarms appear here
Click arrow icon to expand/collapse
Click gear icon for settings