AJA Ki Pro Mini - Manual (Page 55)

KiPro Mini v4.2 www.aja.com 55
9.0 INTERVAL RECORD The Ki Pro Rack can be used to create timelapse recordings via the 9.0 Interval Record, 9.1
Interval Frames and 9.2 Interval Time selections. Note that the 9.1 and 9.2 menu options
will not appear unless 9.0 Interval Record is enabled. The options are ON or OFF:
Example of timelapse recording
selections:
The incoming video signal is 1080i 29.97 fps, the record button is depressed, and the
recording is then stopped 90 seconds later with the following settings:
9.0 Interval Record > On
9.1 Interval Frames > 1
9.2 Interval Time > Second
The resulting recording would be 90 frames in duration, would have a frame rate of 29.97
fps, and would appear to be "undercranked" or "sped up" when compared to a normally
created recording.
NOTE: Selecting an interval frame number that exceeds the incoming video frames per second will
result in normal video. "Overcranking" or "slow mo" is not supported by the interval recording
feature.
9.1 INTERVAL FRAMES Determines how many frames from the incoming video will be used for the recording:
9.2 INTERVAL TIME Determines the time period from which the interval frames are selected:
13.1 CAMERA DATA Some cameras produce SDI ancillary data that users may want to transfer to their Ki Pro
recordings. Examples include: start/stop commands, timecode, reel name, clip name and
take. The CONFIG menu parameter 13.1 Camera Data is designed to address this use of
SDI ancillary data. The default for this parameter is “None”; when this is selected, no
camera metadata is passed to any of the Ki Pro parameters even if a camera with SDI
ancillary data is connected to the Ki Pro. If an appropriate camera is present and sending
appropriate SDI ancillary data and that camera manufacturer/model is selected from the
list, then AJA passes as much of the metadata that is available from the camera (and is
viable for AJA to support) into the Ki Pro’s timecode value, file name, and other
applicable parameters.
OFF (default)
ON Normal recordings are produced.
Timelapse recordings are produced.
Incrementing Value Sets number of frames to use for the recording.
Second
Minute
Hour The second from which interval frames are selected.
The minute from which interval frames are selected.
The hour from which the interval frames are selected.