AJA Ki Pro Mini - Manual (Page 62)

KiPro Mini v4.2 www.aja.com 62
If you select Login for the UserAuthenticate parameter via the web UI, you may enter a
user selected password. As long as the menu parameter is not changed to Disabled, the
password requirement will remain in effect. Any time the web UI is accessed, the login
password will be requested before additional access to any other web UI parameter or
configuration screen will be granted. If you enter a user selected password, be aware that
this password will be retained and you will need to remember the password. If the user
entered password is forgotten, you may clear it by performing a Hard Factory Reset. Note
that a standard Factory Reset does not clear the user entered password. To perform a
Hard Factory Reset, enter the 99.0 Factory Reset parameter, and unlike a typical Factory
Reset where only the ADJUST (up) button is held for 2 seconds, hold both the ADJUST
(up) and the ADJUST (down) buttons simultaneously for 2 seconds.
NOTE: If authentication is used, it provides a minimum security safeguard against unauthorized use
of the Ki Pro Mini in a networked environment. You should not consider it a substitute for
proper network security measures..
55.4 DATE SET This parameter manually sets the calendar date of the internal Ki Pro Mini clock. The
value is defined as YYYY/MM/DD (year/month/day).
55.6 TIME SET This parameter manually sets the calendar date of the internal Ki Pro Mini clock, when
setting manually (NTP not used).
Disabled (default)
Login
Disables the requirement for a login password when
accessing the device via the web UI.
Login is required via the web UI before changes can be made
to the Ki Pro Mini configuration.
variable Using the adjust buttons, enter a calendar date for Ki Pro Mini.
Using the adjust buttons and the top SELECT button, select the
characters for each category (
YYYY/MM/DD ). The adjust
buttons scroll through the choices and the top SELECT button
advances to the next character. While selecting characters, the
character being changed will flash to show its position. When
finished, the final press of the SELECT up button will flash the
whole value, hit SELECT once more to confirm and the next
menu parameter will appear.
variable Using the adjust buttons, enter a time for Ki Pro Mini’s clock.
Using the adjust buttons and the top Select button, select the
characters for each digit (hours/minutes). The adjust buttons
scroll through the choices and the top Select button advances
to the next character. While selecting characters, the character
being changed will flash to show its position. When finished, the
final press of the SELECT up button will flash the whole value,
hit SELECT once more to confirm and the next menu
parameter will appear. Time is set using a 24 hour format
(military) and must be set to GMT time.
Note: there are many websites that will assist you in converting
your local regional time to GMT (UTC). AJA does not endorse
any particular one, but here are two examples:
http://tycho.usno.navy.mil/zones.html
http://hurricanes.noaa.gov/zulu-utc.html