4 dropped frames, 1 format media, 2 delete clips – AJA Ki Pro Mini User Manual
Page 46: 0 reel name
KiPro Mini v4.2
www.aja.com
46
15.4 DROPPED FRAMES
This parameter determines how playback handles dropped frames.
16.1 FORMAT MEDIA
This parameter is used to format the currently selected CF card. These are the options:
16.2 DELETE CLIPS
This parameter can be used to delete all of the clips on the media. These are the options:
Ki Pro Mini CF cards can be used to hold data other than Apple ProRes 422 QuickTime
recordings. If other files are saved to a card, they should be placed outside of the "AJA"
folder. Any material inside of the "AJA" folder will be erased if a MEDIA>Delete
Clips>DELETE ALL is performed.
17.0 REEL NAME
This parameter determines the reel name associated with all clips generated while using
this setting. These are the options:
The reel name is a number between 001 and 999. It is historically linked to the naming
conventions used for film and tape-based media. The REEL NAME is an incrementing
three digit value that works with EDLs. For this reason, the parameter does not have a
“NONE” selection—all clips will be associated with a REEL NAME. The REEL NAME
parameter is also the name of the media as it will appear when the CF card is mounted on
a Mac OSX desktop (and media was formatted by the user).
NOTE:
The REEL NAME cannot be changed once a recording session starts on the storage unit
without reformatting the drive.
CONTINUE
STOP
In the unlikely event that the playback of a clip(s) begins to
drop frames, this parameter allows users to define whether
the playback continues or stops.
KEEP MEDIA (default)
FORMAT MEDIA
No action (do not format the CF card selected)
Format the selected CF card (you will be prompted Confirm
Erase S1? or Confirm Erase S2?—Hold up Adjust button to
confirm))
KEEP CLIPS (default)
DELETE ALL
No action (do not delete clips)
Delete all clips on the storage device when
DELETE CLIPS is pressed or Adjust up arrow is
pressed and held for 2 seconds
001 to 999
(default = 001)
Press ADJUST button up or down to change the
REEL NAME value from 001 to 999.