AJA Ki Pro Mini - Manual (Page 61)

KiPro Mini v4.2 www.aja.com 61
50.4 STATIC GATEWAY This parameter determines the gateway or router used by Ki Pro Mini on your LAN for
TCP/IP networking.
NOTE: The note about editing IP addresses in parameter 50.2 also applies to parameters 50.3 and
50.4.
NOTE: Without a properly configured default gateway (whether you have a router/gateway or not),
Ki Pro Mini will be unable to see other Ki Pros on the network, although you may still be able
to control the Ki Pro Mini via a web browser. Also, without a proper gateway defined, the
discovery feature “Available Ki Pros—Click to Refresh” on the Network web page will not work
correctly and list other Ki Pros or FS1s on the network.
50.5 SYSTEM NAME This parameter defines a name for Ki Pro Mini and gives it a unique identifier. This same
name is used both when displaying systems via the web interface.
50.6 MAC ADDRESS This parameter is an information only field showing the MAC address of the Ki Pro Mini’s
ethernet adapter.
50.9 USER
AUTHENTICATE
This parameter enables or disables an authentication login requirement when using the
web UI. By default this parameter is set to Disabled.
If you select Login via the front panel interface and then you attempt to use the web UI
interface, you will be asked for a login password. The web browser will present the login
screen requesting that a password be entered before you can access any other parameter
or configuration screen.
The password is initially set to the default value: password
variable Using the adjust buttons, enter a gateway compatible with your
LAN (if you have one). This is only needed for Static IP
configurations.
If 50.1 is set to DHCP, the default gateway will be assigned by
the DHCP server
If 50.1 is set to Default Addr, the default gateway is: 10.0.0.1
variable Using the adjust buttons, enter a name for Ki Pro Mini. Using
the adjust buttons and the top Select button, select the
characters for each of the up to 20-character name. The adjust
buttons scroll through the choices and the top Select button
advances to the next character. While selecting characters, the
character being changed will flash to show its position. The
character set allowed is: 0 through 9, '-','.', A through Z
(uppercase) and a through z (lowercase).
Default: Ki Pro Mini
information only display Selecting this parameter allows you to view Ki Pro Mini’s
ethernet MAC address. The MAC address is a unique value
associated with the internal ethernet network adapter. MAC
addresses are also known as hardware addresses or physical
addresses. MAC addresses uniquely identify an ethernet
adapter on a LAN.
MAC address format: MM:MM:MM:SS:SS:SS
The value is 12-digit hexadecimal, where the first half identifies
the manufacturer and the second half identifies the unique
serial number.