AJA Ki Pro Mini User Manual
Page 69
KiPro Mini v4.2
www.aja.com
69
Play Media (15.1):
This parameter determines behavior during playback: one clip will play when “Play” is
selected, or all clips will be played, or the clips in the playlist will be played. See
parameter 15.1, Play Media, in Chapter 3 for greater detail and caveates.
Loop Play (15.2):
This parameter turns looped playback on and off.
Dropped Frames (15.4):
This parameter determines how playback handles dropped frames.
Format Media (16.1):
This parameter is used to format the currently selected storage device.
Reel Name (17.0):
The reel name is a number between 1 and 999 that determines the name of the media as
it will appear when the CF card is mounted on a Mac OSX desktop. To enter a specific
value, click on the number to highlight it, type in a value, and press Enter to confirm the
new value. You may also click and drag on the slider to make adjustments. To increment
by single values using the slider, click the slider to highlight it, and then press the "back"
arrow or "forward" arrow on your keyboard.
NOTE: Note:
The Reel Name cannot be changed once a recording session starts on the storage unit
without reformatting the drive.
Clip Name (17.2):
This parameter determines the clip name associated with all clips generated while using
this setting. The clip name is either “Clip” or “SC”.
Clip Number (17.3):
This parameter determines the clip number, from 1 to 999, that follows the CLIP NAME,
and is associated with all clips generated while using this setting. To enter a specific
value, click on the number to highlight it, type in a value, and press Enter to confirm the
new value. You may also click and drag on the slider to make adjustments. To increment
by single values using the slider, click the slider to highlight it, and then press the "back"
arrow or "forward" arrow on your keyboard.
Clip Append (17.4):
This parameter is used with parameter 17.5 ALPHA APPEND to append a text value after
the CLIP NUMBER or have no text appended.
Alpha Append (17.5):
This parameter is used with parameter 17.4 CLIP APPEND to append a text value after the
CLIP NUMBER.
Take (17.8):
This parameter determines the TAKE number, from 1 to 999, that follows the CLIP NAME
and CLIP NUMBER, followed by any ALPHA APPEND (if selected), generated for all clips
while using this setting. To enter a specific value, click on the number to highlight it, type
in a value, and press Enter to confirm the new value. You may also click and drag on the
slider to make adjustments. To increment by single values using the slider, click the slider
to highlight it, and then press the "back" arrow or "forward" arrow on your keyboard.
Custom Clip (19.1):
This parameter enables or disables whether a custom clip name can be used. Refer to
“Custom Clip Naming” in Chapter 3 for greater detail.
Use Custom Clip Name (19.2):
This parameter allows you to enter a custom clip name. Once entered, you’ll have to click
the Apply button for it to take effect.