AJA Ki Pro Mini - Manual (Page 56)

KiPro Mini v4.2 www.aja.com 56
These are the options:
This menu parameter has domain over an array of other Ki Pro parameters; selecting
Camera Data supersedes other parameter selections if valid ancillary data is present and
the camera is selected from the menu parameter.
NONE (default) Camera metadata is not passed to any of the Ki Pro Mini
parameters even if a camera with ancillary data is connected
to the Ki Pro.
RED One 24 Red One 24 Camera metadata available from the camera is
passed into the Ki Pro’s timecode value, file name, and other
applicable parameters.
RED One 25 Red One 25 Camera metadata available from the camera is
passed into the Ki Pro’s timecode value, file name, and other
applicable parameters.
RED Epic Red Epic Camera metadata available from the camera is
passed into the Ki Pro’s timecode value, file name, and other
applicable parameters.
Canon XF Canon XF-series with SDI outputs will provide ancillary data
that produces start/stop commands and timecode values
but not clip naming.
Canon C300 Canon C300 cameras provide ancillary data that produces
start/stop commands and timecode values but not clip
naming.
Pana AF100 Panasonic AG-AF100 series cameras provide ancillary data
that produces start/stop commands and timecode values
but not clip naming. If the camera is configured for 720p
23.98 (24), 720p 25 or 720p 29.97 (30) recording, this Camera
Data setting will also allow the extraction of these frame
rates for recording on the Ki Pro.
Sony F3 Sony PMW-F3 SDI outputs will provide ancillary data that
produces start/stop commands and timecode values but
not clip naming.
ARRI Alexa ARRI Alexa cameras provide ancillary data that produces
start/stop commands and timecode values; clip naming is
not yet supported.
Canon HDMI Certain Canon HDMI cameras, such as the C100, provide
ancillary data via HDMI that produces start/stop commands
and timecode values but not clip naming.