AJA Ki Pro Mini - Manual (Page 29)

KiPro Mini v4.2 www.aja.com 29
The optional Ki Pro mounting plate—or “cheese plate” — has been pre-drilled to
accommodate a wide variety of user preferred mounting options such as a V-mount,
Camera Rod system, or hot shoe adapter. To extend your mounting options and use the
Ki Pro Mini itself as a mounting point for other 3rd Party devices like batteries or wireless
mics, simply order a second Mini Mount and attach your 3rd party device to it.
Figure 12. Camera Mounting Examples Using Optional Mounting Plate
Applying Power
The installation and set up of a Ki Pro Mini is straight-forward. If you’ll be controlling the
unit from the front panel buttons and display, it’s ready right out of the box. Just cable
the system’s audio and video sources, VTR(s), monitors, and audio equipment, mount the
Ki Pro Mini unit as desired, and begin recording. However, if you wish to control Ki Pro
Mini from a web browser, then there are additional configuration steps necessary.
Warning!
Since the Mains plug is used as the disconnection for the device, it must remain readily
accessible and operable.
Warning!
Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the device.
Warning!
Unplug this device during lightning storms or when unused for long periods of time.
Warning!
Do not open the chassis. There are no user-serviceable parts inside. Opening the chassis
will void the warranty unless performed by an AJA service center or licensed facility.
Remove the supplied AC line cord from mains power when moving the unit. Do not
defeat the safety purpose of the grounding-type plug.