AJA Ki Pro Mini - Manual (Page 86)

KiPro Mini v4.2 www.aja.com 86
After you have entered a name for the preset, press Enter. The preset is not stored until
you save it.
IMPORTANT: Be sure that you have made all of the parameter settings you want for a particular preset
before you save it. By default, all parameters are stored and recalled.
Recalling Presets To recall a preset, select the Recall button in the row assocated with the desired preset.
You can also export a preset file to your computer or import a preset file from your
computer.
NOTE: AJA recommends that presets only be used between the same types of devices. In other
words, only use presets from Ki Pro Minis with other Ki Pro Minis, not with Ki Pros.
At any time you may perform a recall of the Factory Settings if you have presets enabled.
NOTE: Presets do survive reboots of the device. If you want to be sure that your device does not have
someone else's settings in place, you can perform a recall of Factory Settings prior to
configuring and working with the Ki Pro Mini.
The web UI is the preferred method of working with presets, but they may also be saved
and recalled from the front panel UI.
IMPORTANT: Custom naming of presets is not possible from the front panel UI; presets will have their
default names of "Preset 1," Preset 2," etc. To recall a preset from the front panel UI, navigate to
CONFIG menu parameter 91.1 Recall Preset. Use the ADJUST up/down buttons to select a
preset. Use the SELECT up button to choose a specific preset and the ADJUST up button to
recall the preset. To abort recalling a preset, press the select down button.
To save a preset, navigate to CONFIG menu parameter 92.1 Store Preset. Use the ADJUST
up/down buttons to select a preset. Use the SELECT up button to choose a specific preset
and the ADJUST up button to store the Preset. To abort a preset recall, hit the select down
button.
HINT: In both CONFIG menu parameters 91.1 and 92.1, you can tell if you are navigating through
the presets if you see the leading numeric characters flashing. Again, use the SELECT down
button to exit these menu parameters.
For ease-of-use, AJA strongly recommends using the web UI to work with presets; more
options are also available when using the web UI.