AJA Ki Pro Mini User Manual
Page 72
KiPro Mini v4.2
www.aja.com
72
ADJUST (up/down):
While in the TRANSPORT menu, and in the “STOP” mode, the ADJUST buttons will “single
step” the current clip at a rate of one frame per button push (up=forward,
down=reverse).
DELETE CLIP:
Dedicated button that when pressed, deletes the currently selected clip. When pressed,
the system displays a precautionary “ARE YOU SURE?” prompt.
SLOT:
This button serves two purposes. First, it selects which CF card is accessed by the system.
Second, the SLOT button is used to unmount currently selected CF media.
Pushing the SLOT button cycles between unmounting media and selecting media. This
function is only active when in the “STOP” mode and requires a “PRESS STOP TO
CONFIRM” if not stopped. After you select a slot, the system returns to the last selected
clip and timecode for that slot. If the media has been changed since the slot was last
selected (physically removed/media replaced), then the “first” clip on the media will be
“cued” to its start point. If inserted media has any issues, additional prompts may be
displayed as appropriate such as: “WARNING FRMT MEDIA” or “WARNING MEDIA LOW.”
Show Gang View:
When clicked, the Transport screen will be expanded at the bottom to show additional
controls for controlling multiple Ki Pros. See
at the end of
this chapter for an additional tutorial on using this feature.
Figure 20. Ki Pro Mini Web Interface, Transport Screen—Show Gang Control
Caution!
Not using the SLOT button to unmount a CF card before removal can cause problems with
the files stored on the CF card.