AJA Ki Pro Mini - Manual (Page 52)

KiPro Mini v4.2 www.aja.com 52
1.9 SUPER OUT This parameter provides superimposition of timecode and transport state (Record, Pause,
etc.) onto the SDI output. These are the options:
2.1 VIDEO INPUT This parameter selects a video input source from the video input connections available.
This is the video that will be recorded and/or passed through.
NOTE: The message, "WARNING A/V Mismatch" may appear if SDI video is selected and HDMI audio
is selected or vice versa. Embedded audio, via SDI or HDMI, must be matched to the video
source. Analog audio can be used with any video input.
These are the options:
2.2 AUDIO INPUT This parameter selects an audio input source from the audio input connections available,
including embedded SDI audio which requires an SDI video source and HDMI audio,
which requires an HDMI video source.
NOTE: The message, "WARNING A/V Mismatch" may appear if SDI video is selected and HDMI audio
is selected or vice versa. Embedded audio, via SDI or HDMI, must be matched to the video
source. Analog audio can be used with any video input.
These are the options:
NOTE: XLR input could be microphone level or line level, depending on the connector panel switch
setting.
2.3 AUDIO CHANNELS This parameter selects the use of either two or eight audio channels. These are the
options:
Generally, when working with camera sources, there are only one or two audio tracks
being produced, and therefore 2-channel would be the appropriate selection. In post
production use, there are often more channels of audio required, so 8-channel audio may
be the appropriate choice in such situations. Ki Pro Mini only allows for the selection of
either 2 channels or 8 channels of audio to be written to the QuickTime file that is
recorded. Therefore, if the source has more than 2 channels of audio, but less than 8
channels of audio that need to be preserved, the CONFIG Menu parameter 2.3 Audio
Channels would need to be set to "8 Channels."
Off (default)
SDI Superimposition is disabled
Superimposition is enabled for the SDI output
SDI (default)
HDMI Selects SDI input connector
Selects the HDMI input connector
SDI (default)
XLR
HDMI
Selects SDI embedded audio from the SDI input
connector (if SDI video input is selected)
Selects the XLR input for audio input
Selects HDMI embedded audio (if HDMI video input is
selected)
2 Channels (default)
8 Channels Selects recording of 2 audio channels
Selects 8 audio channels (valid for SDI embedded audio
only)