Metrohm viva 1.1 - Manual (Page 191)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Workplace
viva 1.1
￭￭￭￭￭￭￭￭ 179
Selection black | 13 colors
Default value black
Line thickness
Line thickness of the measurement curve for spiking solutions and stand-
ards.
Input range 1 - 10 pixels
Default value 1 pixels
Other
Color of the measurement curve for nondefined solutions.
CVS, CPVS
Selection
orange | 13 colors
Default value orange
CP
Selection
green | 13 colors
Default value green
Line thickness
Line thickness of the measurement curve for nondefined solutions.
Input range 1 - 10 pixels
Default value 1 pixels
Base line
on | off (Default value: on)
If this check box is activated, then the baseline and base points are shown
(only for smoothed curves) and the color of the baseline can be selected.
This parameter can be edited only for Quantity = Current [A].
Selection red | 13 colors
Default value red
Line thickness
Line thickness of baselines.
Input range 1 - 10 pixels
Default value 1 pixels