Metrohm viva 1.1 - Manual (Page 924)

7.10 IO controller
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
912 ￭￭￭￭￭￭￭￭
viva 1.1
Message by e-mail
on | off (Default value: off)
The message is sent to the address defined under [E-mail...] if this check
box is activated. The message is sent in text format.
[E-mail...]
[E-mail...] opens the Send e-mail window (see Chapter 2.5.1, page 79).
Acoustic signal
on | off (Default value: off)
If this check box is activated, an acoustic signal will be emitted in addition
to the message.
Regardless of which Action has been selected, the corresponding mes-
sage will also be displayed on the Messages tab of the live display (see
Chapter 3.8.4, page 161).
If the message is documented in the determination because of an Action,
it is displayed in the determination overview on the Messages tab in the
Information subwindow (see Chapter 4.7, page 356) and can be output
in a report.
Action
Only active and editable for the Type = Level detector.
If the fill level is too low and the level detector is therefore active, one of
the following actions will automatically be carried out at the start test:
Selection Record message | Display message | Cancel
determination
Default value Display message
Record message
The message that the fill level detector on the device is active will auto-
matically be saved in the determination.
Display message
A message is displayed and you can select whether you want to con-
tinue the determination or cancel it. The determination is continued
with [Yes], with [No] it is canceled.
Cancel determination
The ongoing determination will be automatically canceled. The follow-
ing message must be confirmed with [OK].