Metrohm viva 1.1 - Manual (Page 528)

5.5 Method run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
516 ￭￭￭￭￭￭￭￭
viva 1.1
Input range 0.01 - 600,000 ms
Default value 6 ms
Averaged spectra
The number of spectra that are acquired and averaged.
Input range 1 - 10,000
Default value 10
Smoothing
Number of neighboring pixels with which the value for each measurement
pixel is determined.
Input range 0 - 100 pixels
Default value 0 pixels
5.5.2.7.3.4 MEAS Spec - Evaluations
Tab: Method ▶ MEAS Spec ▶ Properties... ▶ Evaluations
Command name
Name of the command.
Entry 25 characters
The evaluation windows for the evaluation of measurement curves can be
activated and defined on this tab.
[New]
Opens the Evaluation window # dialog window for entering the start
and end wavelengths (see Chapter 5.5.2.7.3.5, page 516).
[Properties]
Opens the Evaluation window # dialog window for editing the start
and end wavelengths selected in the table (see Chapter 5.5.2.7.3.5, page
516).
[Delete]
Deletes the selected line.
5.5.2.7.3.5 MEAS Spec - Evaluation window
Dialog window: Method ▶ MEAS Spec ▶ Properties... ▶ Evaluations ▶ [New] /
[Properties] ▶ Evaluation window #
Start wavelength
Lower limit of the spectrum.
Input range 100.0 - 2,000.0 nm
Default value 400.0 nm