Metrohm viva 1.1 - Manual (Page 536)

5.5 Method run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
524 ￭￭￭￭￭￭￭￭
viva 1.1
the drift will be calculated automatically according to the following for-
mula:
Input range 0 - 999,999 s
Default value 154 s
Measuring interval
Time interval for entering a measured value in the measuring point list.
Avantes Spectrometer
Input range
0.1 - 999,999.0 s (Increment: 0.1)
Default value 2.0 s
089 Photometer
Input range
0.25 - 999,999.00 s (Increment: 0.25)
Default value 2.0 s
Stop measured value
Stop when the entered measured value has been reached since the start
of the measurement.
Input range 0 - 4,000 mAU
Selection off
Default value off
off
No stop.
Measurement without drift control
If the Measurement without drift control option has been selected,
then the following parameters will be displayed:
Max. waiting time
Maximum period of time for measurement.
Input range 0 - 999,999 s
Default value 120 s
Measuring interval
Time interval for entering a measured value in the measuring point list.
Avantes Spectrometer
Input range
0.1 - 999,999.0 s (Increment: 0.1)
Default value 2.0 s