Metrohm viva 1.1 - Manual (Page 201)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Workplace
viva 1.1
￭￭￭￭￭￭￭￭ 189
Also show original curve
on | off (Default value: off)
If this check box is activated, then the original curve (solid line, same
color) will be shown in addition to the smoothed curve (dotted line).
3.9.2.3.3 Curve properties measuring commands - y2 axis
Tab: Workplace / Database ▶ Curves # ▶ Properties Curves # ▶ y2 Axis
Parameters for the graphical display of the overlaid curves on the y2 axis
(right-hand y axis).
Quantity
Selection of the quantity to be shown on the y2 axis.
For MEAS Ref
Selection
Wavelength [nm] | Intensity [Counts] | Inten-
sity Dark [Counts] | Transmission [%] | Satura-
ted pixels | off
Default value off
For MEAS Spec
Selection
Wavelength [nm] | Absorbance [mAU] | Inten-
sity [Counts] | Intensity Dark [Counts] | Inten-
sity Ref [Counts] | Transmission [%] | Satura-
ted pixels | off
Default value off
For MEAS Opt
Selection
Time [s] | Measured value | Intensity [Counts] |
Transmission [%] | Saturated pixels | Temper-
ature [°C] | d
ε/dt [mAU/min] | Calculated 1 - 3 |
External 1 - 3 | off
Default value off
MEAS T
Selection
Time | dT/dt | Temperature | off
Default value off
For CAL Spec
Selection
Wavelength [nm] | Intensity [Counts] | Satura-
ted pixels | off
Default value off