Metrohm viva 1.1 (ProLab) - Manual (Page 200)

3.9 Curves subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
188 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
MEAS T
Selection
13 colors | dark blue
Default value dark blue
Symbol
Selection of the symbol for the display of the individual measuring points.
Selection ● | ╳ | ✸ | ￭ | ▲ | no symbol
Default value no symbol
no symbol
Measuring points are not shown.
NOTE
The individual measuring points are no longer displayed for curves for
which the distance between two measuring points is smaller than 5 pix-
els, even if a symbol has been selected. In this case, the graphics win-
dow might be enlarged in order for the symbols to be displayed again.
Symbol color
Selection of the color for the measuring point symbol.
Selection 13 colors | light blue
Default value light blue
MEAS T
Selection
13 colors | dark blue
Default value dark blue
Smoothing
on | off (Default value: off)
Activates/deactivates smoothing for the curves.
Smoothing factor x axis
Factor for smoothing in the direction of the x axis.
Input range 0.01 - 1,000
Default value 0.01
Smoothing factor y axis
Factor for smoothing in the direction of the y axis.
Input range 0.01 - 1,000
Default value 0.01