Metrohm viva 1.1 (ProLab) - Manual (Page 767)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 Configuration
viva 1.1 (for process analysis)
￭￭￭￭￭￭￭￭ 755
[OK]
The Save dialog window for saving data, in which the name and directory
for the export file must be entered, opens. The selected configuration
data is then saved in a file with the extension .mcfg.
6.3.1.2 Importing configuration data
Dialog window: Configuration ▶ File ▶ Import... ▶ Import configuration data
The Import configuration data dialog window, in which the following
parts of the configuration database can be selected for import, is opened
with File
▶ Import... after selection of the *.mcfg file to be imported:
NOTE
Data that is not present in the export file cannot be selected.
Devices
on | off (Default value: on)
Importing configuration data for devices (see Chapter 6.4, page 768).
Dosing units
Importing configuration data for dosing units (see Chapter 6.6, page
781).
Solutions
on | off (Default value: on)
Importing configuration data for solutions (see Chapter 6.5, page 774).
Sensors
on | off (Default value: on)
Importing configuration data for sensors (see Chapter 6.7, page 792).
Common Variables
on | off (Default value: on)
Importing configuration data for common variables (see Chapter 6.10.1,
page 813).
Global Variables
on | off (Default value: on)
Importing configuration data for global variables (see Chapter 6.11.1,
page 822).