Metrohm viva 1.1 (ProLab) - Manual (Page 25)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1 Introduction
viva 1.1 (for process analysis)
￭￭￭￭￭￭￭￭ 13
Database program part
￭ Volume entry with formula
If the volume is entered by way of a formula in the commands ADD
AUX, ADD STD and ADD SAMPLE DT, then the volume will not be
recalculated during reprocessing but the actually dosed volume will be
used for the calculation of the volume record. For this reason, the vol-
ume can no longer be edited during reprocessing in the dialog window
of the respective ADD command.
￭ Several CALL COND type commands during reprocessing
If several commands of the type CALL COND are run through in the
same determination, then they will be properly calculated during repro-
cessing.
￭ Command variables during reprocessing
If user-defined results are entered that access command variables, then
these are calculated during reprocessing.
￭ The dialog window opens only once
In the case of actions requiring a user entry or a selection in quick suc-
cession, the respective dialog window opens only once.
Method program part
￭ CVS command with equilibration time = 0 s
If the equilibration time is set to 0 on the Pretreatment tab in a CVS
command, then the correct current measuring range is now also found
in the subsequent sweep.
￭ Maximum number of characters increased
The maximum number of characters has been increased for the Device
name field in the dialog window of the CTRL command.
￭ Creating a new method during reprocessing
New methods can now also be created while the Reprocessing win-
dow is open.
￭ Checking of the 'Sample type' sample data variable in the
method check
If the LAT, MLAT, DT or RC calibration method is applied, then the
software will check already in the method check whether the Sample
type sample data variable is present in the START command.
￭ Drag and drop improved
The drag-and-drop functionality has been improved in the Method run
window.
￭ RLS DOS
The RLS DOS command allows users to select and use all four dosing
device connectors of an 894 Professional CVS for releasing dosing devi-
ces.
￭ Report output
Reports are output with the correct contents as PDF file and/or print-
out.