Metrohm viva 1.1 (ProLab) - Manual (Page 785)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 Configuration
viva 1.1 (for process analysis)
￭￭￭￭￭￭￭￭ 773
Portrait
Output of the device table in portrait format.
Landscape
Output of the device table in landscape format.
[OK]
The device table is output in the required format as a PDF file and opened
directly in Acrobat Reader, where it can then be printed and/or saved.
6.4.3 Device properties
Dialog window: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'De-
vice type' - 'Device name'
The properties window for the device selected in the device table, in
which the parameters of the device can be edited, is opened with the
[Edit]
▶ Properties...… menu item in the Devices subwindow. It con-
sists of several tabs. The General and GLP tabs are always present; the
other tabs depend on the selected device. Properties can be set for the
following devices:
￭ 894 Professional CVS
￭ 846 Dosing Interface
￭ 858 Professional Sample Processor
￭ 919 IC Autosampler plus
￭ 814/815 USB Sample Processor
￭ Avantes Spectrometer
￭ RS-232 device
￭ Barcode reader
6.4.4 Device assignment
Dialog window: Device assignment
If devices of the type required by a command are present in the device
table but not yet assigned, then a prompt will appear asking the user
whether he or she wants to assign a device. If [Yes] is selected, the
Device assignment dialog window appears, in which a device present in
the configuration and with the required device type can be selected.
Command type
Shows the command type.
Command name
Shows the command name.
Device type
Shows the device type entered in the command.