Metrohm viva 1.1 (ProLab) - Manual (Page 894)

7.6 Avantes Spectrometer
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
882 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
7.5.9 External position
Dialog window: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'De-
vice type' - 'Device name' ▶ Tower ▶ [Edit] ▶ External position #
An Angle and a specific Work position can be defined for each external
position in the External position # dialog window.
Angle
Definition of the swing angle for the selected external position.
Input range -270.0 - 270.0 °
Default value 60.0 °
Work position
Definition of the work position for the selected external position.
Input range 0 - 235 mm
Default value 0 mm
7.6 Avantes Spectrometer
7.6.1 Avantes Spectrometer - Overview
Dialog window: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'De-
vice type' - 'Device name'
The parameters for the Avantes Spectrometer are set on the following
tabs:
￭ General
General device information such as device name, device type, serial
number, etc.
￭ Settings
Information on light source and output signal.
￭ Detector
Information on the detector.
￭ Calibration
Information on wavelength calibration.
￭ Dark spectrum
Information on the dark spectrum.
￭ Reference spectrum
Information on the reference spectrum.
￭ GLP
Information on GLP tests and GLP monitoring.