Metrohm viva 1.1 (ProLab) - Manual (Page 464)

5.5 Method run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
452 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
5.5.2.4.3 ADD STD
5.5.2.4.3.1 ADD STD - Overview
Dialog window: Method ▶ ADD STD ▶ Properties... ▶ ADD STD - 'Command name'
Command for addition of standard solutions.
Appearance
The command has the following appearance:
Parameters
The parameters for the ADD STD command are configured in the follow-
ing dialog window:
￭ ADD STD - Properties
Command variables
The following command variables are generated by the ADD STD com-
mand in the method run and can be used in formulas under the designa-
tion 'Command name.Variable identification':
Identification Description
ACO Addition counter (Number) = current number of
completed runs of the command
BSY Command status; 1 = BUSY, HOLD or ERROR; 0 =
READY; invalid (variable not available) = Command
has never been started
CYL Cylinder volume of the dosing unit used for the com-
mand
FIN Command status:
1 = Command has ended at least once
0 = Command has not yet ended
not valid (variable not available) = Command
has not yet been started
VOL Dosed volume increment in L (Number)
VOLTOT Dosed total volume in L (Number)