Metrohm viva 1.1 (ProLab) - Manual (Page 809)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 Configuration
viva 1.1 (for process analysis)
￭￭￭￭￭￭￭￭ 797
Sensor monitoring
on | off (Default value: off)
The working life of the sensor is monitored when this check box is acti-
vated.
Working life
Working life of the sensor in days. If a value is entered here, then the
Expiry date will be automatically adjusted.
Input range 0 - 999 days
Default value 999 days
Expiry date
Expiry date of the sensor. The date can be selected by clicking on in
the Select date dialog window (see Chapter 2.4.1, page 77). After a
date has been entered, the value for the Working life will be automati-
cally adjusted.
Only editable if monitoring is enabled.
Default value
Set to work+ 999 days
Message
The message options can only be edited if monitoring is enabled.
Message by e-mail
on | off (Default value: off)
If this option is activated, the message is sent to the address defined
under [E-mail...]. The message is sent in text format.
[E-mail...]
[E-mail...] opens the Send e-mail window (see Chapter 2.5.1, page 79).
Acoustic signal
on | off (Default value: off)
If this option is activated, an acoustic signal will be emitted in addition to
the message defined above.
Action
The actions can only be edited if monitoring is enabled.
If during sensor monitoring it is found that the working life has expired,
then one of the following actions will be triggered automatically during
the start test: