Metrohm viva 1.1 (ProLab) - Manual (Page 814)

6.8 Colorimetric sensors subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
802 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
Portrait
Output in portrait format.
Landscape
Output in landscape format.
[OK]
The sensor table is output in the required format as a PDF file and opened
directly with Acrobat Reader, where it can then be printed out and/or
saved.
6.8.3 Properties - Colorimetric sensors
6.8.3.1 Editing the sensor properties
Dialog window: Configuration ▶ Colorimetric sensors ▶ Edit ▶ Properties... ▶ Col-
orimetric sensor - 'Name'
The properties window for the colorimetric sensor selected in the sensor
table, in which the parameters of the colorimetric sensor can be edited, is
opened with the Edit
▶ Properties... menu item in the Colorimetric
sensors subwindow. It consists of the following tabs:
￭ Colorimetric sensor
General information regarding the colorimetric sensor, e.g. name,
device used and comment.
￭ Calibration data
Information about the calibration of the colorimetric sensor.
￭ Limit values
Definition of the limit value monitoring for outliers and the coefficient
of determination.
￭ History
Shows the last 10 calibration values.
6.8.3.2 Properties - Colorimetric sensors
Tab: Configuration ▶ Colorimetric sensors ▶ Edit ▶ Properties... ▶ Colorimetric
sensor
Name
Name of the sensor.
Entry 24 characters
Comment
Possibility of entering remarks about the sensor.
Entry 24 characters
Default value 'empty'