Metrohm viva 1.1 (ProLab) - Manual (Page 506)

5.5 Method run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
494 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
Selection 894 Professional CVS | 846 Dosing Interface |
814 USB Sample Processor | 815 Robotic USB
Sample Processor XL | 858.0010 Professional
Sample Processor | 858.0020 Professional
Sample Processor | 858.0030 Professional
Sample Processor | 919.0020 IC Autosampler
plus | Avantes Spectrometer
Default value 894 Professional CVS
Remote Box
Selection of a Remote Box connected to the instrument.
846 and 894
Selection
1 | 2 | 3 | 4
Default value 1
814, 815, 858, 919
Selection
1 | 2 | 3
Default value 1
Set lines
Output signal
Entry of the bit pattern for the output signal or selection of a predefined
signal pattern.
It is possible to enter the following characters:
0 = Line inactive
1 = Line active
* = Any line status
p = Set pulse (pulse duration = 1 s). If a pulse with a different length is to
be output, then a corresponding template must be defined for this pur-
pose.
Sample changer, 894 and 846
Selection
Bit pattern with exactly 14 characters (0, 1, *,
p) | ************** | Signal pattern
Default value **************
Avantes Spectrometer
Selection
Bit pattern with exactly 10 characters (0, 1, *,
p) | ********** | Signal pattern
Default value **********
The bits are numbered from right to left: