Metrohm viva 1.1 (ProLab) - Manual (Page 695)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.1 (for process analysis)
￭￭￭￭￭￭￭￭ 683
the counter of the substance concentration of the added standard solu-
tion (g; mol or L)
Input range 0 - 6
Default value 2
Selection # | m | µ | n | p
Default value #
RSD of the substance concentration in the sample
Number of decimal places for the relative standard deviation of the sub-
stance concentration in the sample (%).
Input range 0 - 6
Default value 1
Effective addition volume of the standard solution for the evaluation ratio
Number of decimal places for the effective addition volume of the added
standard solution for the evaluation ratio (L).
This result exists only for the calibration method DT and the sample type =
Standard.
Input range 0 - 6
Default value 2
Selection # | m | µ | n | p
Default value #
RSD of the effective addition volume of the standard solution for the evaluation ratio
Number of decimal places for the relative standard deviation of the effec-
tive addition volume of the added standard solution for the evaluation
ratio (%).
This result exists only for the calibration method DT and the sample type =
Standard.
Input range 0 - 6
Default value 1
Calibration factor DT
Number of decimal places and prefix selection for the calibration factor DT
(g/L, L/L, mol/L). The calibration factor corresponds to the concentration
of the standard in the measuring vessel for the evaluation ratio.
This result exists solely for the calibration method = DT and the sample
type = Standard.
Input range 0 - 6
Default value 2
Selection # | m | µ | n | p
Default value #