Metrohm viva 1.1 (ProLab) - Manual (Page 525)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.1 (for process analysis)
￭￭￭￭￭￭￭￭ 513
Input range 1 - 10,000
Default value 10
Smoothing
Number of neighboring pixels with which the value for each measurement
pixel is determined.
Input range 0 - 100 pixels
Default value 0 pixels
5.5.2.7.3 MEAS Spec
5.5.2.7.3.1 MEAS Spec - Overview
Dialog window: Method ▶ MEAS Spec ▶ Properties... ▶ MEAS Spec - 'Command
name'
Command for the Measurement of a sample spectrum.
Instruments
This command can be executed with the following instrument:
Spectrometer: Avantes
Appearance
The command has the following appearance:
Parameters
The parameters for the MEAS Spec command are set on the following
tabs:
￭ General/Hardware
Parameters for instrument.
￭ Measuring parameters
Parameters for setting the measurement procedure.
￭ Evaluations
Definition of evaluation results for the sample spectrum.
Command variables
The following command variables are generated by the MEAS Spec com-
mand in the method run and can be used in formulas under the designa-
tion 'Command name.Variable identification':