Metrohm viva 1.0 (process analysis) - Manual (Page 110)

3.3 Sample tables
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
98 ￭￭￭￭￭￭￭￭
viva 1.0 (for Process analysis)
Options for processing the working sample table in the workplace win-
dow on the Determination series tab.
Delete processed lines
on | off (Default value: off)
If this check box is activated, then lines in the working sample table which
have already been processed completely will be deleted automatically.
Method selection by assignment ID
on | off (Default value: off)
If this check box is activated, then the selected sample identification will
be used for the method selection in the working sample table. This identi-
fication is assigned the designation Assignment ID, which can no longer
be changed. If this ID matches one of the assignment IDs from the sample
assignment table (see Chapter 3.4, page 104), then the respective
method will be loaded.
Selection ID1 | ID2 | ID3 | ID4 | ID5 | ID6 | ID7 | ID8 | ID9 |
ID10 | ID11 | ID12 | ID13 | ID14 | ID15 | ID16
Default value ID1
Request assignment ID
on | off (Default value: off)
If this check box is activated, then the Assignment ID will be requested
immediately after the start of the determination.
Actions for marked sample table lines
Selection
Pause series ( [Pause] ) and show message |
Stop series ( [Stop] )
Default value Pause series ( [Pause] ) and show message
Pause series ( [Pause] ) and show message
If this option is selected, then the series is interrupted before the start
of the marked line (equivalent to [Pause]). At the same time a message
will appear which also contains the text defined in the message box.
Stop series ( [Stop] )
If this option is selected, then the series is stopped before the start of
the marked line (equivalent to [Stop]).
Starts the text editor, with which the message can be entered and edited.