Metrohm viva 1.0 (process analysis) - Manual (Page 642)

5.6 Evaluation subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
630 ￭￭￭￭￭￭￭￭
viva 1.0 (for Process analysis)
Variable Description
VANALYSIS Volume that is removed from the diluted sample solu-
tion (the dilution volume) and used for analysis in the
measuring vessel (see page 87).
5.6.7.6.2 Unit of the concentration of the substance in the sample
Variable name RS.’Command name’.’Substance name’.CONC.UNI
Description Unit of the concentration of the substance in the sample.
Decimal places −
Unit g/L, L/L or mol/L (depending upon the unit of the standard solution)
5.6.7.6.3 Absolute standard deviation of the concentration of the substance
in the sample
Variable name RS.’Command name’.’Substance name’.CONC.ASD
Description Absolute standard deviation of the concentration of the substance in the
sample.
Decimal places 0…2…6
Unit As for concentration of the substance in the sample (see Chapter
5.6.7.6.1, page 629)
5.6.7.6.4 Relative standard deviation of the concentration of the substance in
the sample
Variable name RS.’Command name’.’Substance name’.CONC.RSD
Description Relative standard deviation of the concentration of the substance in the
sample.
Decimal places 0…1…6
Unit %
5.6.7.7 Special results for DT and MLAT
5.6.7.7.1 Standardized area
Variable name RS.’Command name'.'Substance name'.VAR{x}.REP{y}.AREA-
NORM (with call-up of the command by CALL VA)
RS.’Command name'.'Substance name'.VMS.REP{y}.AREANORM
(with call-up of the command by CALL VMS)
Description Standardized area of a peak.
Data type Number