Metrohm viva 1.0 (process analysis) - Manual (Page 439)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.0 (for Process analysis)
￭￭￭￭￭￭￭￭ 427
5.5.2.5.3 MEAS Spec
5.5.2.5.3.1 MEAS Spec - Overview
Dialog window: Method ▶ MEAS Spec ▶ Properties... ▶ MEAS Spec - 'Command
name'
Command for the Measurement of a sample spectrum.
Instruments
This command can be executed with the following instrument:
Spectrometer: Avantes
Appearance
The command has the following appearance:
Parameters
The parameters for the MEAS Spec command are set on the following
tabs:
￭ General/Hardware
Parameters for instrument.
￭ Measuring parameters
Parameters for setting the measurement procedure.
￭ Evaluations
Definition of evaluation results for the sample spectrum.
Command variables
The following command variables are generated by the MEAS Spec com-
mand in the method run and can be used in formulas under the designa-
tion 'Command name.Variable identification':
Identifica-
tion Description
BSY Command status; 1 = BUSY, HOLD or ERROR; 0 =
READY; invalid (variable not available) = Command
has never been started
DBL Total duration for the processing of the command in s
FIN Command status; 1 = Command has ended at
least once, 0, invalid (variable not available) =
Command has never ended