Metrohm viva 1.0 (process analysis) - Manual (Page 714)

6.6 Dosing units subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
702 ￭￭￭￭￭￭￭￭
viva 1.0 (for Process analysis)
Port
Port to be used as dosing port 2.
Selection Port 1 | Port 2 | Port 3 | Port 4
Default value Port 3
Length
Length of the tubing on dosing port 2.
Input range 0.0 - 999.9 cm
Default value 0.0 cm
Diameter
Diameter of the tubing on dosing port 2.
Input range 0.0 - 9.9 mm
Default value 2.0 mm
Fill port
Port
Port to be used as a fill port for aspirating solution.
Selection Port 1 | Port 2 | Port 3 | Port 4
Default value Port 2
Length
Length of the tubing on the fill port.
Input range 0.0 - 999.9
Default value 25.0
Diameter
Diameter of the tubing on the fill port.
Input range 0.0 - 9.9 mm
Default value 2.0 mm
Special port
Port
Port to be used as the special port.
Selection Port 1 | Port 2 | Port 3 | Port 4
Default value Port 4