Metrohm viva 1.0 (process analysis) - Manual (Page 393)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.0 (for Process analysis)
￭￭￭￭￭￭￭￭ 381
￭ RECEIVE
Waiting for event or status messages.
￭ REQUEST
Requesting sample data.
￭ RLS DEV
Releasing an instrument for use in other methods that run in parallel.
￭ RLS DOS
Releasing a dosing device for use in other methods that run in parallel.
￭ SCAN
Scanning remote input lines.
￭ SEND
Sending event messages.
￭ SERIES END
Start command for the series end track.
￭ SERIES START
Start command for the series start track.
￭ SEQUENCE
Combining several commands to one command.
￭ START
Start command for the main track.
￭ STIR
Controlling a connected stirrer.
￭ SWING
Swinging of the robotic arm (with Swing Head only).
￭ TRACK
Start command for the normal track.
￭ TRANSFER
Data transfer via RS-232 to external devices or programs.
￭ VA TRACK
Start command for VA track.
￭ WAIT
Interrupting the method run.
5.5.2.2 Track commands
5.5.2.2.1 Track commands - Overview
Menu item: Method ▶ Insert ▶ New track...
The following track commands exist for the various tracks:
￭ START
Start command for main track (see Chapter 5.5.1.2.1, page 372).
￭ TRACK
Start command for normal track (see Chapter 5.5.1.2.2, page 373).
￭ VA TRACK
Start command for VA track (see Chapter 5.5.1.2.3, page 374).
￭ SERIES START
Start command for series start track (see Chapter 5.5.1.2.4, page 375).