Metrohm viva 1.0 (process analysis) - Manual (Page 305)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Database
viva 1.0 (for Process analysis)
￭￭￭￭￭￭￭￭ 293
Grid type
Selection of the type of grid line.
Selection Line types | dotted
Default value dotted
Grid color
Selection of the color for the grid lines.
Selection 13 colors | gray
Default value gray
Background
Background color
Selection of the color for the curve background.
Selection 13 colors | white
Default value white
Show end points
on | off (Default value: off)
If this check box is activated, then the endpoints found will be shown on
the curve by the ♦ symbol and labeled with BP# (break point), FP# (fixed
endpoint), HP (HNP), MI (minimum value) or MA (maximum value).
Automatic EPs
Selection of the color for automatically set endpoints.
Selection 13 colors | black
Default value black
Manual EPs
Selection of the color for manually set endpoints.
Selection 13 colors | light red
Default value light red
Show evaluation lines
on | off (Default value: off)
If this check box is activated, then the evaluation lines (tangents, auxiliary
lines) will be shown.
Tangents
Selection of the color for the tangent lines and evaluation lines.