Metrohm viva 1.0 (process analysis) - Manual (Page 566)

5.5 Method run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
554 ￭￭￭￭￭￭￭￭
viva 1.0 (for Process analysis)
￭ DIGITAL OUT
Actuating digital outputs.
￭ DIGITAL IN
Loading digital inputs.
￭ ANALOG OUT
Outputting results in analog values.
￭ ANALOG IN
Loading analog inputs.
￭ CONTROL
Controlling Beckhoff instruments.
￭ STEPPING MOTOR
Actuating a stepping motor.
￭ PORT
Actuating a multi-port valve.
5.5.2.11.2 DIGITAL OUT
5.5.2.11.2.1 DIGITAL OUT - Overview
Dialog window: Method ▶ DIGITAL OUT ▶ Properties... ▶ DIGITAL OUT - 'Com-
mand name'
Instruments
This command can be executed with the IO controller and the Stepping
Motor Controller.
Appearance
The command has the following appearance:
Mode of operation
Digital outputs can be actuated two different ways:
￭ They can be set to active or inactive with or without start delay.
￭ The timer function can be used to set an output to active for a certain
time after a start delay.
After the command has run, the statuses and the default values of all of
the digital outputs used in the command are saved in command variables.
Parameters
The parameters for the DIGITAL OUT command are set on the following
tabs:
￭ General
￭ Digital outputs