Metrohm viva 1.0 (process analysis) - Manual (Page 785)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
7 Devices
viva 1.0 (for Process analysis)
￭￭￭￭￭￭￭￭ 773
Input range -270.0 - 270.0 °
Default value 60.0 °
Work position
Definition of the work position for the selected external position.
Input range 0 - 235 mm
Default value 0 mm
7.4 919 IC Autosampler plus
7.4.1 919 IC Autosampler plus - Overview
Dialog window: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'De-
vice type' - 'Device name'
Model versions
The 919 IC Autosampler plus is available in one model version:
￭ 919.0020 919 IC Autosampler plus
Sample changer with integrated two-channel peristaltic pump.
Tabs
The parameters for the 919 IC Autosampler plus are set on the follow-
ing tabs:
￭ General
General device information such as device name, device type, serial
number, etc.
￭ Tower
Properties of the tower.
￭ Rack
Information on the rack attached.
￭ Initializing position
Position which is automatically approached when the sample changer
is initialized.
￭ MSB #
Properties of the MSB connector and the peripheral devices connected
to it.
￭ GLP
Information on GLP tests and GLP monitoring.
7.4.2 Properties - General
Tab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'Device type' -
'Device name' ▶ General
General properties of the device are displayed on the General tab.