Metrohm viva 1.0 (process analysis) - Manual (Page 239)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Database
viva 1.0 (for Process analysis)
￭￭￭￭￭￭￭￭ 227
NOTE
The following fields, which do not permit page break controls, cannot
be inserted into a group field:
￭ Fixed report
￭ Result table
￭ Curve
￭ Calibration curve/Calibration data
Inserting
In order to insert a group field into a report template the corresponding
icon must be selected on the module bar and then placed on the report
template by creating a field with the left mouse button.
Properties - Group field
X pos.
Shows the predefined X position for the field.
Y pos.
Y position within the permitted range.
Input range 0.0000 - (max. page height) mm
Width
Shows the predefined width of the field.
Height
Height of the field
Input range 0.0000 - (max. page height) mm
4.4.1.4.3.9 Report template - Result table
Program window: Database ▶ Tools ▶ Report templates ▶ New/Open... ▶ Form
report... ▶ Result table
Result tables are used for outputting determination results in tabular for-
mat in the report.