Metrohm viva 1.0 (process analysis) - Manual (Page 469)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.0 (for Process analysis)
￭￭￭￭￭￭￭￭ 457
Measuring interval
Time interval for entering a measured value in the measuring point list.
Input range 0.25 - 999,999.00 s (Increment: 0.25)
Default value 2.00 s
Stop measured value
Stop when the entered measured value has been reached since the start
of the measurement.
Input range 0 - 4,000 mAU
Selection off
Default value off
off
No stop.
Measurement without drift control
If the option Measurement without drift control has been selected,
then the following parameters will be displayed:
Measuring time
Duration of the absorbance measurement.
Input range 0 - 999,999 s
Default value 120 s
Measuring interval
Time interval for entering a measuring point in the measuring point list.
Input range 0.25 - 999,999.00 s (Increment: 0.25)
Default value 2.00 s
Stop measured value
Stop when the entered measured value has been reached since the start
of the measurement.
Input range 0 - 4,000 mAU
Selection off
Default value off
off
No stop.