Errors, Copy does not start, Message is displayed – Sindoh N700 User Manual
Page 112
Copy Features
2-
36
3. Errors
Copy does not start
Message is displayed
Major messages are described below. If the other message is displayed, take action by the message
instruction.
- For the message of Service Call, check the contact number and the Machine number and then
notify your Service Center.
Status
Cause
Solution
Original size is not known.
Original difficult to recognize
the size is set.
For the original difficult to
recognize the size, set the
paper not [Auto Paper
Select] but [Paper Select].
For Reduce/Enlarge, set it
with the way except
[Auto Reduce/Enlarge].
Original is not set.
Set the original.
Check Original Orientation. Original Orientation is not
proper.
Change the Original
Orientation.
Set the paper in ( ) size.
There is no proper paper in
the Paper Tray.
Pressing the
key allows to
be copied onto the set paper.
This paper size cannot
make Rotate Sort.
The paper not to rotate and
sort is selected.
Select the paper in the size
available for Rotate Sort.
See
This paper size cannot
make Staple.
The paper not to staple is
selected.
Select the paper in size
available for Staple.
See
Stable available Size.
This paper size cannot
make 2 Sided Copy.
The paper not available for 2
Sided Copy is selected.
For the paper available for 2
Sided Copy,
see
The quantity of available
copy is ( ).
The quantity of copy is over
the upper limit.
You can change the upper
limit of the quantity of copy
at a time See