Sindoh N700 - Manual (Page 131)

3-
15
FAX Features
3
Polling transmission
It is possible to set up the original to be stored in the memory so that the other party can request the
reception of the stored memory at the desired time to receive it. If the polling feature is used,
the call charge is to be borne by the receiver.
1
Press [FAX] on the LCD home screen and switch to Fax Mode:.
2
Set the original on the Flatbed or the ARDF.
When transmitting the original on the Flatbed, check that no original shall be set on the ARDF.
Note
- Set up the resolution and image density after switching to Fax Mode.
3
Select [Polling Send]:
4
Press 【 】 Key.
Scan the original and store it in the memory and then exit the actions.