Sindoh N700 - Manual (Page 215)

6-
9
Setting
6
Feature Description Set point
1.3-Mac
Address Mac address
1.4-Connect Access to the Network with the set point in
1.1-Machine IP Address .
Connect
2.1-Search
Wifi Pressing the menu allows AP List appears. Select
one AP and then enter the ID and the Password
for the security set AP. This feature can be used
after attaching USB wireless LAN card.
2.2-Machine
Wifi IP
address Select either Auto-Obtain or Manual Input. In
selecting Manual Input, the user can change the
IP address to use. IP must be set up after
selecting AP from 2.1-Search Wifi To boot over
the Network with the set point, press [OK] or
2.6-Connect Wifi button.
* Auto-Obtain (DHCP)
Specify
IPv4
Subnet mask
Gateway
DNS Server 1
DNS Server 2
2.3-Machine
Wifi IPv6
address Wireless IPv6 address
2.4-Wifi Mac
Address Wireless Mac address
2.5-Auto
Connection When booting a device, auto access can be
decided by the wireless network accessed lately. ON
* OFF
2.6-Clear
Saved SSID Total access history to wireless network can be
deleted. After the deleting, auto access cannot
be made to security applied wireless network. Clear
2.7-Connect
Wifi Access to the network with the set point in
2.2-Machine Wifi IP address
Connect
3-Permit
SSL/TLS
Communica-
tion Cipher text only
Cipher text priority
* Cipher text clear text
Generate Certificate
4-SMB
computer
name Set a computer name for using ‘Net Folder’.
(A rebooting is required after changing this
data.)
Serial Number
5-SMB work
group Set a computer name for using ‘Net Folder’.
(A rebooting is required after changing this
data.)
‘WORKGROUP’
* : Default when shipped at the Factory